DSPIAE - AT-CJ Angle Cutting Station

DSPIAESKU: AT-CJ
filler

Price:
Sale price$59.99
Stock:
Only 1 unit left

Description

Angle Cutting Station
"Plaplate's meant to be cut, right?"

Symmetrical Construction
With the combination of horizontal and 45° mirrored, sector-shaped baffle plates, only imagination is the limit of your creation!

45°~90° effective cutting angles on sector-shaped plates.
2~58mm effective cutting length
38mm effective cutting width

Accurate Duplication
Parts with intricate angles are easily duplicated for your modeling works.

Imported Material
Carbon steel razor blades imported from Germany are pressure tested to meet the
demands on cutting most of plastic parts.
Various handle damping can be obtained by adjusting screw tightness.

Efficiency Multiplayer
Say "good-bye" to those tedious repeated works. Experience the new "One-cut" actions on plastic sheets and rods.
- Support cutting plastic rods with a diameter up to 3mm
- Support cutting plastic sheets with a thickness up to 1mm

Replaceable Cutting Mat
Free replacement of the newly upgraded mini cutting mat.
Cutting mat replacement procedure:
1. Remove each horizontal and sector baffle plates from the cutting station.
2. Use included hex wrench to remove blade fastening screw and blade.
3. Use hot air from a hair drier to heat the cutting mat for 2-3 minutes.
4. Use a pry bar with flat end to lift off the cutting mat to be replaced.
5. Glue remover may be used to get rid of any remained residues.
6. Remove the backing paper from the new cutting mat and carefully place it in place.
7. Re-install blade, sector plates and horizontal plates.
*hair drier, pry bar and glue remover not included in this product and should be
prepared by user's own source.

Packing Details
AT-CJ
Angle Cutting Station X1
Hex wrench X2
Anti-skid pad X4
Blade X1
CJB-01
Blade X1
CJ-M01
Cutting mat X1

Specification
Name: Angel Cutting Station
Model: AT-CJ
Dimensions: 178*150*45mm
Net weight: 487 +5g
Blade material: Carbon steel
Main material: Aluminum alloy

Precautions
• Contains sharp blade, keep out of reach of children under 14 years of age.
• Do not use this product to cut plastic sheets thicker than 1mm (or plastic rods
greater than 3mm in diameter) to avoid possible blade breakage.
• Never place your finger under the blade. Wear proper protection if necessary.
• Blade gets blunt after prolonged use. Replace in time to ensure proper results.
• Always place this product on a solid, flat surface for best cutting results.
• This product is dedicated for cutting plastics, never attempt to cut metals which
may cause blade breakage.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed